 |
 |
 |
 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Prestressed Beams - 150mm or 225mm deep prestressed concrete inverted 'T' beams manufactured in 'cast in situ moulds' and containing 5mm or 7mm prestressed wires- Infill Blocks - The block infill laid flat between the concrete beams
- Load Span Table - Table which determines the spans achievable, based on the loadings required, and the layout required for the floor beam centres
- Screed - 65mm minimum cement & screed finish to the beams. (Normally carried out at 'finish' stage of construction, by your plastering contractor)
- Super Imposed Loadings - The standard weight imposed onto a floor to be designed in, for its specific usage e.g. domestic dwelling is 1.50KN/m˛
- Dead Loadings - A fixed weight applied to a floor imposing a permanent load e.g. insulation & screed
- 440 - a 440 x 215 x 100mm Deep Infill Block Laid to Its Full Length
- 215 - a 440 x 215 x 100mm Deep Infill Block Laid to its width
- Other Dimension = an Infill Block Cut To Size Shown
- Black Single Line On Drawing Is The Centre Line of 1No. Beam
- Dotted Line is the First Beam Laid In The Bay
 |
 |
Merseybeams Limited Riverbank Road Bromborough Wirral Merseyside CH62 3LQ Tel: 0151 334 7346 Fax: 0151 334 0600 Email: info@merseybeams.com |